Wig Care Instructions

SYNTHETIC WIGS & HAIRPIECES

**ALWAYS USE METAL COMB OR BRUSH**

**WASH IN COLD WATER ONLY**

**NEVER USE HEATED ROLLERS, DRYERS OR OTHER

APPLIANCES – HEAT DAMAGES FIBRE**#

**USE ONLY RECOMMENDED PRODUCTS TO INCREASE

THE LIFE OF YOUR WIG/HAIRPIECE**

**NEVER BRUSH/COMB WHEN WET**

WASHING PROCEDURE

1.       ONLY WASH WIGS EVERY 15-20 WEARINGS & HAIRPIECES IF NEEDED.

2.       USE APPROX. 5MLS SHAMPOO IN COLD WATER.

3.       SOAK WIG/HAIRPIECE 15 MINUTES (DO NOT RUB OR SCRUB).

4.       DRAIN BASIN AND RINSE GENTLY IN FRESH COLD WATER.

5.       DRAIN BASIN, ADD APPROX. 5 ML CONDITIONER AND SOAK ADDITIONAL 15 MINUTES.

6.       REMOVE AND GENTLY SQUEEZE OUT OR SHAKE OFF EXCESS WATER.

NEVER RUB, BRUSH OR COMB FIBRE WHEN WET – IT WILL MATT.

7.   DRY FLAT ON TOWEL OR ON WIG STAND IN SHADE.

8.   DO NOT BRUSH FIBRE WHEN WET.  WHEN THOROUGHLY DRY, BRUSH INTO SHAPE.

9.   THE “REVITALIZING MIST” IS A FIBRE CONDITIONER THAT IS ADDED TO YOUR RINSE WATER AND CAN BE LIGHTLY SPRAYED ON WEEKLY BETWEEN WASHINGS.

NOTE:  SYNTHETIC FIBRE DOES NOT ATTRACT OR HOLD DIRT LIKE HUMAN HAIR, AND THE MORE PRODUCT (LIKE HAIRSPRAY) USED ON THE FIBRE, THE MORE OFTEN IT NEEDS WASHING.    

# CURLABLE FIBRE PRODUCTS REQUIRE THE SAME CARE INSTRUCTIONS AS ABOVE, BUT CAN BE STYLED USING HEATED TOOLS UP TO 180 DEGREES AND FOLLOWING THE INSTRUCTIONS ATTACHED TO THE PIECE.